Event Information
The “Getting Started with Dante (by Audinate)” series of videos provides a high-level practical view of Dante audio networking.
Click on the link to the Crestron Training website:
Dante Overview
(4:56)
In Chapter 1: Dante Overview, we learn:
- moving from analog to digital networking
- working with dante products from multiple manufacturers
- dante performance
- basic network equipment requirements for dante
- basic networking knowledge and dante
A Simple Dante Network
(3:55)
In Chapter 2: A Simple Dante Network, we learn:
- Creating a basic network with Dante devices and a network switch
- Discovery of Dante devices
- Routing signals with Dante Controller
- Auto-reconnect of subscriptions between power cycles
Dante Controller
(5:32)
In Chapter 3: Dante Controller, we learn:
- Automatic discovery of connected Dante devices
- Navigating the Dante Controller interface
- Routing View
- Clock Status
- Network Status
- Event Log
- Routing signals
- Split signals
- Naming devices and audio channels
- Clocking basics
Dante Virtual Soundcard
(6:13)
In Chapter 4: Dante Virtual Soundcard, we learn:
- What is Dante Virtual Soundcard?
- Stopping and starting Dante Virtual Soundcard
- ASIO and WDM drivers for Windows
- Configuring Dante Virtual Soundcard
- Channels
- Latency
- Network interfaces
Dante Virtual Soundcard demonstration: multitrack recording
Networking Basics for Audio
(6:47)
In Chapter 5: Networking Basics for Audio, we learn:
- IP addresses
- DHCP
- Names vs. addresses
- Quality of Service 0:0QoS settings on switches
- Choosing a network switch
Dante Clocking Basics
(4:42)
In Chapter 6: Dante Clocking Basics, we learn:
- How Dante clocking compares to legacy digital audio
- Dante clock roles and elections
- Clock failure modes
- Configuring Clock behaviors in Dante Controller
- Using external clocks
Unicast and Multicast Transport
(2:29)
In Part 7: Unicast and Multicast Transport, we learn:
- Understanding Unicast and Multicast on IP networks
- Best practices for use of Multicast
- Configuring Multicast with Dante Controller
Dante Redundancy
(3:59)
In Part 8: Dante Redundancy, we learn:
- How Dante Redundancy works
- Configuring a redundant network
- Best practices for redundancy
