4x1 Computer Graphics Video & Stereo Audio Standby Switcher
Series: Main
Model: VP-411DS
Part #: 51-70654190
High Bandwidth - 300MHz (-3dB)
Looping Input - Input 1
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
The VP-411DS is a high-performance switcher for computer graphics video signals, with-resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, the switching priority can be set for each of the four inputs.
High Bandwidth - 300MHz (-3dB)
Looping Input - Input 1
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
Primary Input - Selectable
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), contact closure, & IR remote (included)
Output Disconnect
Front Panel Lockout
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 rack adapter
Rackmountable - Yes
Supported Resolution - UXGA (1600x1200)
Switcher Audio Input Signal Type - Stereo Audio
Switcher Connector Type - Other
Switcher Type - Audio
Switcher Type - Computer
Switcher Type - Video
Switcher Video Signal Supported - Component
Warranty - Yes
Spec Sheet available - Yes
Product Weight:
2.43 lbs
Number of Inputs:
4
Number of Outputs:
1
Current Draw:
0.23 Amps
DC Voltage:
12 Volts
Depth:
6.40 in
Height:
1.70 in
Width:
8.46 in
Inputs:
4 UXGA with loop on IN 1 on 15-pin HD connectors, 4 unbalanced stereo audio with loop on IN 1 on 3.5mm mini jacks
Outputs:
1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
Controls:
Input selector; PANEL LOCK and OFF pushbuttons; IR remote control reception window; connector for extended IR reception; RS-232 connector; contact closure terminal block for external wire switching; input priority selector DIP-switches; normal/Kr-isp® and program/normal mode selectors via slide switches on the underside
Coupling:
VIDEO: DC
AUDIO: DC
Audio THD + Noise:
0.004% @1kHZ
Audio 2nd Harmonic:
0.002% @1kHZ
Accessories:
Power supply, IR remote control
Options:
RK-1 19" rack adapter, external remote IR receiver cable
