Signal Processing Systems : Extenders & Repeaters : Kramer Electronics USA, Inc. - VA-4X

4-Channel 4K HDMI Extender/Toolbox

Model: VA-4X

Part #: 50-00076790

Extension without Loss of Quality - Kramer Equalization and re-Klocking™ Technology rebuilds the digital signal integrity to travel longer distances. Typically extends 4K at 60Hz (4:4:4) signals 20m from point to point (10m on the input and 10m on the out
Zero-latency compression - Enables reducing 4K at 60Hz resolution from 4:4:4 to 4:2:2 or 4:2:0 chroma sampling on up to four inputs/outputs
Easy EDID Management - Via a user-friendly software application or OSD menu, select from the following EDID options: default (internal), external (sink) or user defined EDID
Content Protection Compatibility - Interoperability between HDCP 2.2 and HDCP 1.4 systems for up to 4 HDMI sources simultaneously
Comprehensive Signal Testing - Independent pattern generator on each output with a variety of patterns and resolutions to choose from

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

VA-4X is a versatile 4K at 60Hz (4:4:4) HDMI multi-channel extender that equalizes and reclocks TMDS data before re-transmitting the signal, thus increasing the HDMI cable range for all 4 outputs. It is a true 4-channel HDMI "Toolbox", with functionality including 4 independent test-pattern generators, chroma sub-sampling down-conversion and EDID management options.

Extension without Loss of Quality - Kramer Equalization and re-Klocking™ Technology rebuilds the digital signal integrity to travel longer distances. Typically extends 4K at 60Hz (4:4:4) signals 20m from point to point (10m on the input and 10m on the out
Zero-latency compression - Enables reducing 4K at 60Hz resolution from 4:4:4 to 4:2:2 or 4:2:0 chroma sampling on up to four inputs/outputs
Easy EDID Management - Via a user-friendly software application or OSD menu, select from the following EDID options: default (internal), external (sink) or user defined EDID
Content Protection Compatibility - Interoperability between HDCP 2.2 and HDCP 1.4 systems for up to 4 HDMI sources simultaneously
Comprehensive Signal Testing - Independent pattern generator on each output with a variety of patterns and resolutions to choose from
Local Control and Configuration - Use the OSD menu via front panel buttons for management and control of the EDID, chroma reduction and pattern generator, and for firmware upgrade and factory reset. Convenient USB port for EDID application control and fir
Easy Installation - Compact MegaTOOLS® fan-less enclosure for surface mounting or side-by-side mounting of 2 units in a 1U rack space with the recommended rack adapter

Extender Type - HDMI
Spec Sheet available - Yes

Inputs: 4 HDMI On female HDMI connectors
Outputs: 4 HDMI On female HDMI connectors
Ports: 1 USB On a female USB type-A connector for firmware upgrade, 1 RS-232 On a 9-pin D-sub connector for EDID management via a software application
Video: HDCP Standards Compliance 1.4 & 2.2, Maximum Resolution 4K at 60Hz (4:4:4)
User Interface: Control OSD menu via front panel buttons, Indicators Power LED
Storage Temperature: -40° to +70 Degree C (-40 to 158 Degree F)
Humidity: 10% to 90%, RHL non-condensing
Accessories: Included Power adapter, bracket set, Included Power adapter, bracket set
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Wireless: No
Current Draw: 1.80 Amps
DC Voltage: 5 Volts

Extender 763822 kb - Data Sheet

Project List

Suggested Products

High Performance IP to Port Expander

by Aurora Multimedia Corp.

4K HDMI® over HDBaseT® Extender w/IR & RS-232

by Crestron Electronics, Inc.

DM NUX USB over Network Wall Plate with Routing, Local, Black

by Crestron Electronics, Inc.