The Model UV2-S is a 2-channel video splitter that can send a VGA or component video signal to multiple displays on Cat-5 cable. This unit feature a standard HD15 VGA connector for the input and has 2 RJ45 connectors for the outputs. It also provide an additional VGA output for connection to a local monitor.
The UV2-S can drive Cat-5 cables of lengths up to 500 feet. At the remote (receiving) end of the Cat-5 cables a Model UV1-R is required to convert the UTP signal back to VGA for connection to a monitor. In most setups only one power supply is necessary for the entire system. The UV2-S Sender/Splitter come with a power supply that is capable of powering itself and all the UV1-R receivers. For Cat-5 runs of over 300 feet, the receivers need their own additional supplies that must be ordered separately (HRT model # 511-GS569).
Support for local monitor at sending end
Multiple Cat-5 outputs
Handles resolutions up to 1600x1280 at any refresh rate
Drive standard CAT5 cables to 500 feet
Rugged, Reliable, Compact size
Transmit video and phantom power on one cable
Adjustable cable length compensation at each receiver
Only one power supply required for sender and all receivers
Receiver/Transmitter Cable Type - Other
Receiver/Transmitter Format Type - Component Video
Receiver/Transmitter Format Type - Composite Video
Receiver/Transmitter Format Type - VGA
Supported Resolution - Other
Spec Sheet available - Yes
Transmission Range:
500 ft
DC Voltage:
9 Volts
Depth:
2.60 in
Height:
1.22 in
Width:
4.86 in
Shipping Weight:
3 lbs
Resolutions:
Up to 1920 x 1440 non-interlaced at 60Hz
Standards:
VGA, SVGA, XGA, or UXGA video
Video Types:
VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
