3-series 4K DigitalMedia Presentation System 150

• HDBaseT - Yes
• Rackmountable - Yes
• Supported Resolution - 1080p (1920x1080)
• Supported Resolution - 4K (4096x2400)
• Supported Resolution - UXGA (1600x1200)
• Supported Resolution - VGA (640x480)
• Supported Resolution - WQXGA (2560x1600)
• Supported Resolution - WUXGA (1920x1200)
• Supported Resolution - Other
• Switcher Audio Input Signal Type - Mono Audio
• Switcher Audio Input Signal Type - Stereo Audio
• Switcher Connector Type - HDMI
• Switcher Connector Type - VGA
• Switcher Type - Audio
• Switcher Type - Video
• Switcher Video Signal Supported - Component
• Switcher Video Signal Supported - Composite
• Switcher Video Signal Supported - RGBHV
• Switcher Video Signal Supported - S-Video
• RX RS-232 - No
• TX RS-232 - No

• Number of Inputs: 10
• Number of Outputs: 1
• Rack Units (Height): 1
• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 41 F
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Current Draw: 1.40 Amps
• Depth: 10.47 in
• Height: 1.74 in
• Width: 17.28 in
• Product Weight: 6.40 lbs
• Regulatory Compliance: HDCP
• Active Power: 42 Watt
• Operating System:
  •Crestron 3-Series; real-time, preemptive, multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs; preloaded DMPS3.AV Framework Base Program; out-of-the-box “Crestron Connect It” functionality
• Control System Memory:
  •SDRAM: 1GB
  •Flash: 4GB
• COMMUNICATIONS:
  •Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP, IPv4 or IPv6, Active Directory authentication, IIS v.6.0 web server, SMTP e-mail client, RSTP, Private Network Mode
  •Cresnet: Cresnet master mode
  •USB: USB host ports for Crestron Connect It devices and firmware update via USB flash drive; USB device port for computer console (setup); supports USB signal routing via select DM transmitters and receivers, or via USB-EXT-DM extenders
  •RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
  •IR/Serial: 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; built-in RC-5 compatible IR receiver
  •DigitalMedia: DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet
  •HDBaseT: HDCP, EDID, CEC, RS-232, PoE, Ethernet
  •HDMI: HDCP, EDID, CEC
• Video:
  •Switcher: 10x1 (organized as multi-format 6x1), auto-switching, auto-detecting multi-format digital/analog source inputs, QuickSwitch HD technology
  •Scaler: 4K video scaler, motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion, content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1)
  •Input Signal Types: HDMI with Deep Color, 3D, and 4K (DVI and Dual-Mode DisplayPort compatible); DM 8G+ and HDBaseT with Deep Color, 3D, and 4K; RGB/VGA (RGBHV, RGBS, RGsB); component (YPbPr); S-Video (Y/C); composite (NTSC, PAL) [5]
  •Output Signal Types: HDMI with Deep Color, 3D, and 4K (DVI compatible); DM 8G+ and HDBaseT w/Deep Color, 3D, and 4K
  •Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels
• Audio – General:
  •Switcher/Mixer: 10x1 (organized as multi-format 6x1) stereo source switcher, auto-detecting digital/analog source inputs, single-channel gated mic preamp w/DSP, two independent mic/source mixers (one for analog output, one for digital outputs), stereo DSP for analog output, 6x1 multichannel source switcher, digital audio mixer bypass mode for multichannel pass-through to digital outputs
  •Analog-To-Digital Conversion: 24-bit 48 kHz
  •Digital-To-Analog Conversion: 24-bit 48 kHz
  •Frequency Response: 20 Hz to 20 kHz +/-0.5 dB (digital source), 20 Hz to 20 kHz +/-0.5 dB (analog line source), 20 Hz to 20 kHz +/-0.7 dB (microphone source)
  •S/N Ratio: >108 dB, 1 kHz, A-weighted (digital source), >103 dB, 1 kHz, A-weighted (analog line source)
  •THD+N: <0.002%, 20 Hz to 20 kHz (digital source), <0.005%, 20 Hz to 20 kHz (analog line source), <0.05%, 20 Hz to 20 kHz (microphone source)
  •Stereo Separation: >108 dB (digital source), >103 dB (analog source)
• Audio - Microphone Input:
  •Input Signal Type: Mono analog mic level
  •Phantom Power: Enable/Disable
  •Gain: 0 to +60 dB Gain adjustment, plus Mute
  •EQ Center Frequencies: 50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2), 800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4)
  •EQ Gain: +/-12.0 dB per band
  •Gating Threshold: -80 to 0 dB
  •Gating Depth (Attenuation): -80 to 0 dB
  •Gating Attack: 1 to 250 ms
  •Gating Release: 1 to 1000 ms
  •Gating Hold: 1 to 200 ms
  •Compression Threshold: -80 to 0 dB
  •Compression Ratio: 1:1 to 10:1
  •Compression Attack: 1 to 250 ms
  •Compression Release: 1 to 1000 ms
  •Compression Hold: 1 to 200 ms
  •Compression Curve: Hard or soft knee
• Audio - Source Inputs:
  •Typical of 10 source input channels (Audio Inputs 1 - 4, HDMI Inputs 1 - 4, and DM Inputs 1 - 2)
  •Input Signal Types: Analog 2-channel, HDMI (Dual-Mode DisplayPort compatible [4]), DM 8G+ and HDBaseT
  •Analog Formats: Stereo 2-channel
  •Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels
  •Input Compensation: +/-10dB
• Audio - Analog Line Output:
  •Output Signal Type/Format: Stereo 2-channel
  •Mic: -80 to +10 dB Level adjustment range, plus Mute and Pan
  •Source: -80 to +10 dB Level adjustment range, plus Mute and Balance
  •Master Volume: -80 to +10 dB Level adjustment range, plus Mute and Mono
  •Bass: +/-12.0 dB
  •Treble: +/-12.0 dB
  •Equalization: 10-band graphic
  •GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
  •GEQ Gain: ±12.0 dB per band
  •Delay: 0.0 to 80.0 ms
  •Limiter Threshold: -80 to 0 dB
  •Limiter Ratio: 1:1 to 10:1
  •Limiter Attack: 1 to 250 ms
  •Limiter Release: 1 to 1000 ms
  •Limiter Curve: Hard or soft knee
• Audio - Digital Output:
  •Output Signal Types: HDMI, DM 8G+ and HDBaseT
  •Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels
  •Mic: -80 to +10 dB Level adjustment range, plus Mute and Pan
  •Source: -80 to +10 dB Level adjustment range, plus Mute and Balance
  •Master Volume: -80 to +10 dB Level adjustment range, plus Mute
• Connectors - Audio/Video Inputs:
  •VGA IN 1 - 4: (4) HD15 female
  •Analog VGA/RGB/video inputs
  •Signal Types: VGA, RGB, component, S-Video, or composite
  •Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL
  •Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration
  •Input Impedance: 75 Ohms nominal
  •Sync Detection: RGBHV, RGBS, RGsB, YPbPr
  •Sync Input Level: 3 to 5 Vp-p
  •Sync Input Impedance: 2.2k Ohms
  •AUDIO IN 1 - 4: (4) 3.5 mm TRS mini phone jacks
  •Unbalanced stereo line-level analog audio inputs
  •Input Impedance: 32k Ohms unbalanced
  •Maximum Input Level: 2.8 Vrms unbalanced
  •Note: If an HDMI input is selected but no digital audio signal is detected, the corresponding analog audio input is activated (AUDIO 1 for HDMI 1, etc.). Please note, the analog audio inputs do not pass audio if the HDMI video input resolution is higher than 1920x1200.
  •HDMI IN 1 - 4: (4) 19-pin Type A HDMI female
  •Digital video/audio inputs
  •Signal Types: HDMI, DVI, or Dual-Mode DisplayPort
  •DM IN 1 - 2: (2) 8-pin RJ45 female, shielded
  •DM 8G+ inputs, HDBaseT compliant
  •PoDM PSE ports (HDBaseT PoE compatible)
  •Each connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
  •MIC IN: (1) 3-pin 3.5 mm detachable terminal block
  •Balanced microphone audio input
  •Input Level: -60 to 0 dBV, 1 Vrms maximum
  •Input Impedance: 6.5k Ohms balanced
  •Phantom Power: 48 Volts DC, software enabled/disabled
  •Connectors - Audio/Video Outputs
  •HDMI OUT: (1) 19-pin Type A HDMI female
  •Digital video/audio output
  •Signal Types: HDMI, DVI [4]
  •DM OUT: (1) 8-pin RJ45 female, shielded
  •DM 8G+ output, HDBaseT compliant
  •PoDM PSE port (HDBaseT PoE compatible)
  •Connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
  •AUDIO OUT: (1) 5-pin 3.5 mm detachable terminal block
  •Balanced/unbalanced stereo line-level audio output
  •Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
  •Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
• Connectors - Control and Power:
  •RELAY 1 - 2: (1) 4-pin 3.5 mm detachable terminal block
  •Comprises (2) normally open, isolated relays
  •Rated 1 Amp, 30 Volts AC/DC
  •MOV arc suppression across contacts
  •INPUT 1 - 2: (1) 3-pin 3.5 mm detachable terminal block
  •Comprises (2) programmable digital inputs
  •Input Voltage Range: 0 to 24 Volts DC, referenced to GND
  •Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
  •Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts
  •Pull-up Resistor: 2.2k Ohms per input
  •IR OUT: (1) 3.5 mm mini-phone jack
  •IR/Serial output port
  •IR output up to 1.2 MHz
  •1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
  •COM: (1) 5-pin 3.5 mm detachable terminal block
  •Bidirectional RS-232 port
  •Up to 115.2k baud, hardware and software handshaking support
  •LAN: (1) 8-pin RJ45 female
  •10Base-T/100Base-TX Ethernet port
  •USB 1 - 4: (4) USB Type A female
  •USB 2.0 host ports for TT-100 series Crestron Connect It Cable Caddies
  •Also enables firmware update via USB flash drive
  •G: (1) 6-32 screw, chassis ground lug
  •NET: (1) 4-pin 3.5 mm detachable terminal block
  •Cresnet Master port
  •Available Cresnet Power: 24 Watts
  •100-240V~1.4A 50/60Hz: (1) IEC 60320 C14 main power inlet
  •Mates with removable power cord, included
  •COMPUTER (front): (1) USB Type B female
  •USB computer console port
  •For setup only
  •IR IN (front): (1) Infrared sensor
  •IR Frequency: 36 to 38 kHz
  •IR Formats: Crestron format, RC5
  •Allows control from IR wireless remotes using the Crestron or RC-5 command sets
• Controls and Indicators:
  •PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, turns amber while booting and green when operating
  •NET: (1) Yellow LED, indicates Cresnet bus activity
  •MSG: (1) Red LED, indicates internal control system has generated an error message
  •HW-R: (1) Recessed pushbutton for hardware reset, reboots the control system
  •SW-R: (1) Recessed pushbutton for software reset, restarts the software program
  •AUTO INPUT SELECT: (1) Pushbutton and bi-color green/amber LED, selects auto-switching mode
  •VGA INPUT SELECT 1 - 4: (4) Pushbuttons for manual input selection, and (4) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding VGA input
  •HDMI INPUT SELECT 1 - 4: (4) Pushbuttons for manual input selection, and (4) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding HDMI input
  •DM INPUT SELECT 1 - 2: (2) Pushbuttons for manual input selection, and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding DM input
  •VOLUME: (1) Continuous turn rotary encoder, adjusts the analog audio output volume
  •DM IN 1 - 2 (rear): (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding DM input
  •DM OUT (rear): (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence, for the DM output
  •LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status
• Enclosure:
  •Chassis: Metal, black finish, fan-cooled, vented sides
  •Front Panel: Metal, black finish with polycarbonate label overlay
  •Mounting: Freestanding, 1 RU 19-inch rack-mount, or under-table mount (adhesive feet, rack ears, and under-table mounting brackets included)

CNSP-XX
Custom Serial Interface Cable

DM-8G-CONN
DigitalMedia 8G™ Cable Connector

DM-8G-CONN-WG
DigitalMedia 8G™ Cable Connector with Wire Guide

DM-8G-CRIMP
Crimping Tool for DM-8G-CONN

DM-8G-CRIMP-WG
Crimping Tool for DM-8G-CONN-WG

STIRP
IR Emitter Probe