This set consists of 2 x EW-DX SKM-S (handheld with mute switch), 2 x MMD 835 capsule (cardioid, dynamic), 1 x EW-DX EM 2 rackmout receiver (2 channels) and 2 x BA 70 rechargeable batteries.
FEATURES EW-DX EM 2:
2 channel half rack (9.5ft)
Up to 88 MHz switching bandwidth
PoE IEEE 802.3af Class 3
Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules
Clear and easy focused user interface with OLED display
Ethernet connectivity (IPv4 and IPv6)
Secure AES 256 encryption
External PSU 12V/1A
All-metal housing
FEATURES EW-DX SKM-S:
10mW RF power with up to 100m/328ft working range
Charging contacts for in-device charging with CHG 70N
Persistent eInk display - parameters visible on screen even when device is not powered on
Programmable mute switch on EW-DX SKM-S - customize the device depending on your professional needs
Function buttons - control all the transmitter settings directly from handheld microphone
Extended runtime with lithium-ion batteries - up to 12 hours operation time
Standard capsule interface - compatible with a wide range of Sennheiser and Neumann capsules
Mic input trim control
Metal housing
Includes:
EW-DX EM 2 rack receiver
2 EW-DX SKM-S handheld transmitters
2 MMD 835 microphone modules
2 MZQ 1 microphone clamps
2 rod antennas
power supply with country adapters
GA 3 rackmount set
4 rubber feet
2 BA 70 rechargeable battery packs
quick guide
safety guide
manufacturer declaration sheet
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
14 F
Wireless:
Yes
System:
•Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz •Audio frequency response: 20 Hz - 20 kHz (-3 dB) at 3 dBfs •Audio THD: -60 dB for 1 kHz at -3 dBfs input level •Dynamic range: 134 dB •System latency: 1.9 ms •Relative humidity: 5 - 95 % (non-condensing)
EW-DX EM 2 (Rack Receiver) :
•Input voltage 11 - 13 V or PoE IEEE 802.3af Class 0 (CAT5e or higher) •Input current: 1 A •Transmit power (radiated): BLE: max. 10 mW EIRPAudio output power 18 dBu max. •Headphone output: 2x 70 mW at 32 OHMS •Ethernet: RJ-45 socket, IEEE802.3; 100Base-TX (half+full duplex); 10Base-T (half+full duplex) (CAT5e or higher) •Dimensions: 212 x 44 x 189 mm (8.35" x 1.73" x 7.44") •Weight: approx. 1000 g (2.2 lbs) (without antennas and power supply
EW-DX SKM-S (Handheld Transmitter) :
•Input voltage: 2.0 - 4.35 V •Input current: < 300 mA •Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack •Occupied bandwidth: 200 kHz •Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP); LD mode: 10 mW ERP; BLE: max. 10 mW EIRP •Dimensions (Dia x l) (incl. MMD 835 microphone module) (without microphone module): 50 x 268 mm (1.97" x 10.55"), 40 x 200 mm (1.57" x 7.87") •Weight (without batteries) (incl. MMD 835 microphone module) (without microphone module): approx. 304 g (0.67 lbs), approx. 195 g (7.14 lbs)