The FP-AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 has a single 75 ohm input phono jack for the video signal and two phono jacks for the left and right audio inputs. Four source-terminated, 75 ohm video outputs are provided on the video output phono jacks. Four stereo audio outputs are provided on phono jack pairs located adjacent to the corresponding video output. Unused outputs need not be terminated. Audio and video outputs are at unity gain.
Consumer Audio/Video Distribution
Four Outputs (Video + Stereo Audio)
Professional Quality Performance
75 ohm Video Input/Outputs
Unbalanced Audio Input/Outputs
Wideband Video - Flat to 10 MHz
Ultra-Compact All Metal Construction
DA Video Input - Other
DA Video Output - Other
DA Audio Input - Other
DA Audio Output - Other
VIDEO :
Inputs:
Phono jack, 1V p-p
Input Impedance:
75 ohm
Gain:
Unity
Outputs (4):
Phono jack
Output Level:
1 V p-p (into 75 ohm)
Frequency Response:
10 Hz to 10 MHz (+/- 0.2 dB)
Noise:
< -75 dB (below 1 V p-p)
Output Isolation:
> 45 dB
Differential Gain:
0.1%
Differential Phase:
0.1 degree (measured at 10% and 90% APL)
